1. Ensure the printer is powered off (O).
2. Press and hold Menu/Enter while powering on (|) the printer. The message
STARTING UP displays.
3. After start-up is complete, release Menu/Enter and the message PRINT OUT=NO
displays.
until the message SERIAL INTERFACE displays.
4. Press
until the message INTF=xxxxxxxxx displays, where xxxxxxxxx can be
5. Press
SERIAL NO, RS-232C, or RS-422A.
until the message EMUL=xxxxxxxxxxx displays, where xxxxxxxxxxx can
6. Press
be NATIVE 4247, 4202 III XL, 2381, or EPSON FX. If you want to select a value
other than the one displayed, press
7. To exit from Power On Configuration, press Menu/Enter. Your new value is
stored in NVM.
Character Set
You can set the character set to any of the following values:
v PC1 (PC Character Set 1)
v PC2 (PC Character Set 2) (default)
v Italic (Epson FX only)
To change or check the Character Set:
1. Ensure the printer is powered off (O).
2. Press and hold Menu/Enter while powering on (|) the printer. The message
STARTING UP displays.
3. After start-up is complete, release Menu/Enter and the message PRINT OUT=NO
displays.
until the message SERIAL INTERFACE displays.
4. Press
until the message INTF=xxxxxxxxx displays, where xxxxxxxxx can be
5. Press
SERIAL NO, RS-232C, or RS-422A.
until the message CHAR SET=xxxxxx displays, where xxxxxx can be PC1,
6. Press
PC2, or ITALIC. If you want to select a value other than the one displayed, press
or .
7. To exit from Power On Configuration, press Menu/Enter. Your new value is
stored in NVM.
Print Language
You can select any print language that is available for your printer. The following
print languages are available when printer emulation is set to Native 4247, 4202 III
XL, 2381, or Epson FX:
Arabic
Arabic Extended
Baltic Multilingual
Canadian French
Cyrillic
Cyrillic (ISO 8859-5)
Cyrillic 2 (Personal Computer)
Cyrillic Windows
Danish/Norwegian
Estonian
or .
CP864
CP1046
CP921
CP863
CP855
CP915
CP866
CP1251
CP865
CP922
Chapter 4. Configuring Your Printer
95