Optional Printer Stand; Summary - IBM 4247 A00 User Manual

6. With Automatic Load set to YES in the Power On Configuration menu, after a
7. When you are finished using the Manual Sheet Feed, return to Front Push by

Optional Printer Stand

The optional printer stand supports the printer and provides easier access to some
of the forms paths.
Load the forms as depicted in Figure 16. Input Front depicts where you load and
stack forms for the Front Push, Push Pull, and Dual Push forms paths. Input Rear
depicts where you load and stack forms for the Rear Push and Dual Push forms
paths. The Output is the same for Input Front and Input Rear.
Figure 16. Optional Printer Stand

Summary

By completing this chapter, you have set up your printer to use the Front Push
forms path and the Manual Sheet Feed.
If you are setting up the printer for a different forms path, proceed to "Chapter 2.
Considering Other Forms Paths" on page 33.
If your printer will use only the Front Push forms path with the Manual Sheet Feed,
and the factory default configuration is the correct choice for your printer, go to
"Chapter 5. Attaching Your Printer" on page 123 to learn how to attach the printer to
your computer.
See "Chapter 4. Configuring Your Printer" on page 79 to learn about changing the
printer configuration.
32
4247 Printer Model A00 User's Guide
three-second timeout the paper is fed automatically into the printer, and your job
is printed.
pressing Path until the Front Push indicator is blinking, and the message 01
END OF FORMS displays.
Input
Front
Input
Rear
Output