Chapter 5. Attaching Your Printer
Attaching to Your Computer
This section provides specific instructions on attaching the printer to your computer.
Supported devices include:
v Personal Computers
v IBM RISC System/6000
v IBM AS/400
v LAN Features
v IBM S/390 and S/370 using an IBM 3174 workstation controller with an
For cable part number and specification information, see "Chapter 8. Supplies,
Forms, and Cables" on page 151 or contact your IBM marketing representative.
Attaching Parallel Cable
DANGER
© Copyright IBM Corp. 1995, 1998
- IBM compatible personal computers with an RS-232C, RS-422A, or
Centronics Parallel interface
- IBM Personal System/2 COMx or LPTx ports
- IBM AS/400 with ASCII workstation controller
- IBM AS/400 twinaxial terminals including IBM 348X, IBM 3477, and IBM 3197
display stations
- Ethernet 10BaseT (RJ45) Network Print Server
- Ethernet 10Base2 (BNC) Network Print Server
- Token-Ring Media Type 1 Network Print Server (with 9-pin D-sub connector)
- Token-Ring Media Type 3 Network Print Server (unshielded twisted-pair)
Asynchronous Emulation Adapter
<2> To prevent serious personal injury from electrical shock when
connecting or disconnecting the interface cable, power off (O) the printer
and disconnect the power cord from the power source at the receptacle.
. . . . . . . . . . . . . . . . . . 128
123