Alarm; Automatic Load - IBM 4247 A00 User Manual

6. Press
7. To exit from Power On Configuration, press Menu/Enter. Your new value is

Alarm

The audible alarm will sound after you interrupt a ready condition. You can stop the
alarm after it begins sounding by pressing a key.
You can set the audible alarm by selecting one of the following values:
Yes (default)
No
To change or check the Alarm control value:
1. Ensure the printer is powered off (O).
2. Press and hold Menu/Enter while powering on (|) the printer. The message
3. After start-up is complete, release Menu/Enter and the message PRINT OUT=NO
4. Press
5. Press
6. Press
7. To exit from Power On Configuration, press Menu/Enter. Your new value is

Automatic Load

This parameter is available only for Manual Sheet Feed. You can set automatic load
to one of the following values:
Yes (default)
No
To change or check the Automatic Load value:
1. Ensure the printer is powered off (O).
2. Press and hold Menu/Enter while powering on (|) the printer. The message
3. After start-up is complete, release Menu/Enter and the message PRINT OUT=NO
4. Press
5. Press
6. Press
102
4247 Printer Model A00 User's Guide
until the message SEQUENCE=xxxxxx displays, where xxxxxx can be NONE,
FR+RR ASF1+2, ASF123. If you want to select a value other than the one
displayed, press or .
stored in NVM.
Alarm will sound.
Alarm will not sound.
STARTING UP displays.
displays.
until the message FUNCTIONS displays.
until the message FRONT TEAR=xxxx displays, where xxxx can be NORM,
AUTO, or NO.
until the message ALARM=xxx displays, where xxx can be YES or NO. If
you want to select a value other than the one displayed, press
stored in NVM.
Enables the quick printing function. This means that a single sheet
form will be loaded automatically when inserted into the printer.
Disables the quick printing function. This means that a single sheet
form will not be loaded automatically when inserted into the printer.
To load the form, press Load/Form Feed.
STARTING UP displays.
displays.
until the message FUNCTIONS displays.
until the message FRONT TEAR=xxxx displays, where xxxx can be NORM,
AUTO, or NO.
until the message AUTOLOAD=xxx displays, where xxx can be YES or NO. If
you want to select a value other than the one displayed, press
or .
or .