Environmental Requirements; Operating Environment; Nonoperating Environment; Shipping Environment - IBM 4247 A00 User Manual

2. For additional information on stacking, see "Setting Up Manual Sheet Feed

Environmental Requirements

The printer operates best in business offices.
Attention: To prevent printer damage, do not power on (|) the printer immediately
after the printer has been moved from an environment that does not meet the
following operating requirements. Introduce the printer to the new operating
environment at least 24 hours before you power it on (|).

Operating Environment

The following tables show the operating environment requirements for the printer.
Variable
Temperature
Relative humidity
Maximum wet bulb
temperature
Note: The best conditions for feeding and stacking are within a temperature range

Nonoperating Environment

The following tables show the non-operating environment requirements for the
printer.
Variable
Temperature
Relative humidity
Maximum wet bulb
temperature

Shipping Environment

The following table shows the shipping environment requirements for the printer.
Variable
Temperature
Relative humidity
Maximum wet bulb
temperature
Note: The printer must be covered in plastic.
160
4247 Printer Model A00 User's Guide
Path" on page 30 or "Chapter 3. Setting Up Another Forms Path" on page 39,
depending on your forms path.
of 15.6° to 32.2°C (60° to 90°F) and a relative humidity range of 26% to
62%.
Range or Value
10° to 40° C (50° to 104°F) 16° to 32° C (60° to 90°F) with
ASF
8% to 80%
26.7°C (80.0°F) 22.8°C (73.0°F) with ASF
Range or Value
10° to 51°C (50° to 125°F) 10° to 43°C (50° to 109°F) with
ASF
8% to 80%
26.7°C (80°F) 27.0°C (80.6°F) with ASF
Range or Value
-40° to 60°C (-40° to 140°F)
5% to 100% (including condensation, excluding rain)
30°C (86°F)