Figure 18. Tractors and Forms Paths
Changing to a Different Forms Path
To change the forms path, you will perform the following tasks:
1. Identify the existing forms path (see "Identifying Existing Forms Path" on
2. Identify the new forms path (see "Identifying New Forms Path" on page 42).
3. Remove the existing forms tractor, if necessary (see "Removing Existing Forms
4. Prepare the new forms path (see "Preparing Printer for Selected Forms Path" on
page 42).
Tractor" on page 42).
page 44).
Chapter 3. Setting Up Another Forms Path
41