Set Coded Font Local (Scfl); Set Inline Margin (Sim); Set Intercharacter Adjustment (Sia) - IBM 6400 Programmer's Reference Manual

Set Coded Font Local (SCFL)

This control selects a previously-assigned font, pitch, and code page. The Load
Font Equivalence command assigns a font local identifier (LID) to a specified
font, pitch, and character set. The SCFL control then specifies the LID to use for
printing. A Print Quality Control subcommand specifying a print quality that is
compatible with the LID (defined by a previous Load Font Equivalence command)
must precede the SCFL control to provide the desired font and quality selections.
Valid values for this parameter are 01 to X
LPD value.
Table 62. Set Coded Font Local
Byte Value
0-1 X 2BD3
'
2 X 03
' '
3
X F0
' '
X F1
' '
4 X 01 - X
' '
X FF
' '

Set Inline Margin (SIM)

This control specifies the position of the inline margin in the
the printer performs a Begin Line command. Receipt of this control does not
change the current print position. A value of X
the value in the LPD command.
Note: Values as large as X
Table 63. Set Inline Margin
Byte Value
0-1 X 2BD3
'
2 X ' 04 '
3
X ' C0 '
X ' C1 '
4-5 X 0000
' '
X ' FFFF

Set Intercharacter Adjustment (SIA)

This control specifies additional inline adjustment between graphic characters.
All values between 0 and X
printer to use the value in the LPD command.
Table 64 (Page 1 of 2). Set Intercharacter Adjustment
Byte Value
0-1 X 2BD3
'
Description
Text Control Escape Sequence
'
Length
Set Coded Font Local
Unchained
Chained
FE Font Local ID
' '
Use LPD value or, if no LPD
received, use printer default
' 7FFF ' are valid but might be off the page.
Description
Text Control Escape Sequence
'
Length
Set Inline Margin
Unchained
Chained
- X 7FFF Displacement (Ia)
' '
See "Notation Conventions" on page 27
' Use LPD value or, if no LPD
received, use printer default
' 7FFF ' are valid. A value of X ' FFFF ' causes the
Description
Text Control Escape Sequence
'
Presentation Text Command Set
' FF ' . A value of X ' FF ' specifies the
( I ) direction, when
' FFFF ' causes the printer to use
Chapter 3. IPDS Commands Reference
Error Code
X 021E..01
' '
X 0218..02
' '
X 023F..02
' '
Error Code
X ' 021E..01 '
X 0210..01
' '
Error Code
71