Table of Contents
Advertisement
®
xStack
Authorized Mode
Click the Apply button to accept the changes made for each individual section.
Compound Authentication Guest VLAN Settings
Users can assign ports to or remove ports from a guest VLAN.
To view the following window, click Security > Compound Authentication > Compound Authentication Guest
VLAN Settings, as shown below:
The fields that can be configured are described below:
Parameter
VLAN Name
VID (1-4094)
Port List
Action
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Port Security
Port Security Settings
A given port's (or a range of ports') dynamic MAC address learning can be locked such that the current source MAC
addresses entered into the MAC address forwarding table cannot be changed once the port lock is enabled. The port
can be locked by changing the Admin State pull-down menu to Enabled and clicking Apply.
Port Security is a security feature that prevents unauthorized computers (with source MAC addresses) unknown to the
Switch prior to locking the port (or ports) from connecting to the Switch's locked ports and gaining access to the
network.
To view the following window, click Security > Port Security > Port Security Settings, as shown below:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Toggle between Host Based and Port Based. When Port Based is selected, if one of the
attached hosts passes the authentication, all hosts on the same port will be granted
access to the network. If the user fails the authorization, this port will keep trying the next
authentication method. When Host Based is selected, users are authenticated
individually.
Figure 9-60 Compound Authentication Guest VLAN Settings window
Description
Click the button and assign a VLAN as a Guest VLAN. The VLAN must be an existing
static VLAN.
Click the button and assign a VLAN ID for a Guest VLAN. The VLAN must be an existing
static VLAN before this VID can be configured.
The list of ports to be configured. Alternatively, tick the All check box to set every port at
once.
Use the drop-down menu to choose the desired operation: Create VLAN, Add Ports, or
Delete Ports.
330
Advertisement
Table of Contents
