When The Message "The Staple Cartridge Is Empty." Appears - Minolta EP2080 Operator's Manual

108

3. When the Message "The Staple Cartridge is empty." Appears

Replacing the Staple Cartridge
10-Bin Staple Sorter
Taking hold of the Lock Release Lever
1
of the Staple Sorter, slide the Staple
Sorter away from the copier.
Stapler Door
Open the Stapler Door.
2
While lifting the Staple Cartridge
3
Release Lever, pull the Staple
Cartridge out of its port.
The message shown on the left appears when the
staples are running out in a copier system
equipped with a Staple Sorter.
Replace the Staple Cartridge with a new one by
following the procedure given below.
Lock Release Lever
Pull the staple belt about 3 cm out of
4
the new Staple Cartridge and break off
that portion.
NOTE
Check that no portion of the staple belt
hangs out of the cartridge. Break off
any portion of the belt that hangs out of
the cartridge.