When The Message "The Staple Cartridge Is Empty." Appears; Replacing The Staple Cartridge - Minolta CF910 Manual

6-6

3. When the Message "The Staple Cartridge is empty." Appears

Replacing the Staple Cartridge

Grasping the Lock Release Lever, slide the
1
Staple Sorter away from the copier.
Open the Stapler Door.
2
While pushing up the Staple Cartridge
3
Release Lever, pull the Staple Cartridge out
of its port.
Pull the staple sheet about 3 cm out of the
4
new Staple Cartridge and break off that
portion.
The message shown on the left appears when the
staples are running out.
Replace the Staple Cartridge with a new one by
following the procedure given below.
1154P447CA
NOTE
Check that no portion of the staple sheet hangs
out of the Cartridge. Break off any portion of the
sheet that hangs out of the Cartridge.
1144O252AA
Insert the new Staple Cartridge until a click
5
is heard.
1136O003AA
Close the Stapler Door and slide the Staple
6
Sorter back against the copier.
1139O0970A
1134O077AA
1139O1440A
1144O253AA