Recalling Copy Job Programs - Minolta EP3010 Manual

User Mode Settings
6.2

Recalling Copy Job Programs

Recall a stored copy job program.
1 Touch the Job Recall box on the Control Panel.
The display will change.
Touch the program location under
2
which the desired copy job program
is stored.
or
Touch the [Account Job] box to
display supplementary program
locations for your access number.
The display will change.
Check your function settings.
3
Is one of the settings incorrect?
?
Press the appropriate key to go
Ü
straight to the area in which you
can correct your setting.
Are your settings correct?
?
Touch the [Exit] box. The
Ü
display will change.
Touch the [Exit] box to confirm your program location selection.
4
Why enter the Number of Originals?
The Number of Originals will be queried if your program contains a
copier mode that requires the Number of Originals.
Rev. /
6
6-3