5
5.6
Using Copy Programs
Up to 10 sets of copy settings can be stored as copy programs.
To store a copy program
1
Press the [Copy] key, and select in advance the copy functions to be registered.
2
Press the [Mode Check] key.
3
Touch [Job Mem Input], and then
touch the number where you wish
to store the copy program.
❍
Number buttons on which
does not appear have already
been assigned a copy
program.
If a button that has already
been programmed is selected,
the previously assigned copy
program is deleted.
4
Touch [Check], and then touch a number button.
5-38
5.6 Using Copy Programs
Di2010f/Di2510f/Di3010f/Di3510f