Random Playback; Time Display Switching; Timer Playback; Repeat Playback - Tascam Professional CD-RW900 Owner's Manual

Random playback

In this mode, the unit will play back all the tracks on
the disc in completely random order, regardless of
track number.
When stopped, set the mode to display
. Press the
Mode>Random
back will begin.

Time display switching

When the key on the front panel or the re-
TIME
mote control is pressed, the time display will switch
through several modes on the display.
≠ Elapsed track time (no display light indication)
≠ Remaining track time (
≠ Elapsed disc time (
TOTAL
≠ Remaining disc time (
the display)
When stopped, the total recording time is shown, re-
gardless of the status of the
cators.

Timer playback

By using an external timer, you can set the CD-
RW900 to play the loaded disc automatically when
the unit is turned on by the timer.
1. First, plug the power cord of the CD-RW900 into
the power outlet of the timer.
2. Load a disc into the unit.
3. Switch the switch on PLAY to enable
TIMER
timer function on for the desired deck.
When Timer playback has been turned on, the
timer icon lights up in the display.

Repeat playback

1. Press the key to turn on the repeat mode.
REPEAT
In this mode, all the tracks on the disc are played
continuously. The display shows
the indicator lights up
During playback, if the repeat mode is turned on,
playback continues as before, and when the last
track finishes, playback resumes from the first
track.
If the repeat mode is turned on when the deck is
stopped, press the
PLAY
Program
key and random play-
PLAY
is lit in the display)
REMAIN
is lit in the display)
and are lit in
TOTAL REMAIN
and indi-
TOTAL REMAIN
Timer indicator
and
Repeat ON
.
REPEAT
key to begin operation.
4−Playback operations
NOTE
Even when the power is turned off, the unit will re-
main in Random mode.
or
NOTE
≠ In program mode, pressing the
the elapsed and the remaining time of the whole
program.
≠ When playing an MP3 disc, elapsed track time is
always displayed, and the
used.
≠ For details on time display during recording,
please refer to "Time display while recording" in
"Recording" section on page 22.
≠ Even when power is turned off, the time display
mode setting is retained.
NOTE
The indicator flashes when a disc is not loaded into
the unit.
4. Set the timer to the desired time. Consult the tim-
er's operation manual for details. At the set time,
the power to the CD-RW900 will be turned on,
and playback will automatically begin.
2. Press the
REPEAT
mode.
Repeat OFF
tor turns off.
NOTE
≠ Combining the repeat mode with the program,
Single-track playback and Random playback func-
tions will enable Program repeat, Single-track re-
peat and Random repeat operations, respectively.
≠ Settings for the repeat playback mode remain af-
ter power is turned off, except the specified A-B
section (see "A to B repeat playback" on page
20).
1-Introduction
TIME key displays
TIME key cannot be
key again to turn off repeat
appears then the
REPEAT
TASCAM CD-RW900
indica-
1