Fast Forwarding And Rewinding; Cueing With The Jog/Data Dial; Jogging While Viewing A Waveform; Jogging While Listening To Audio - Tascam DP-24SD Owner's Manual

Fast forwarding and rewinding

During playback or stop, press the REW (m) (TO ZERO)
button or the F FWD (,) (TO LAST REC) button to rewind
or fast-forward while the button is pressed. The rewind and
fast-forward speed is fixed at 10 times.

Cueing with the JOG/DATA dial

You can use the JOG/DATA dial to position a playback position
precisely. There are two methods of positioning: viewing the
track's waveform and listening to the track sounds.

Jogging while viewing a waveform

1. Use the transport button or location function to move the
playback position near a position where you want to cue.
2. Press the JOG PLAY button to enter the search mode.
You can switch between the timeline display and waveform
display by pressing the F1 key. Select the waveform display
screen.
3. Press the SELECT button of a track whose waveform you
want to view.
The waveform of the selected track appears.
If a stereo track is selected, the displayed track (odd or even)
changes each time the SELECT button is pressed, and only
the displayed track can be monitored.
4. Use the CURSOR (g/t) buttons to scale up/down the
display horizontally (time) as necessary.
Press the CURSOR (g) button to scale down horizontally
(time), or the CURSOR (t) button to scale up.
Also, use the CURSOR (5/b) buttons to scale up/down the
display vertically (audio level).
Press the CURSOR (5) button to scale up vertically (audio
level), or the CURSOR (b) button to scale down.
Scaling up makes it easier to cue the position precisely.
5. Use the JOG/DATA dial to find a cue point.
6. When the cue point is determined, press the JOG PLAY
button to return to the Home screen.

Jogging while listening to audio

1. Use the transport button or location function to move the
playback position near a position where you want to cue.
2. Press the JOG PLAY button to enter the search mode.
You can switch between the timeline display and waveform
display by pressing the F1 key. Select the timeline display
screen.
3. Use the CURSOR (g/t) buttons to scale up/down the
display horizontally (time) as necessary.
Press the CURSOR (g) button to scale down horizontally
(time), or the CURSOR (t) button to scale up.
Scaling up makes it easier to cue the position precisely.
7 - Recorder Functions
Now, jog sounds can be heard. (Jog sound refers to a repeat
playback sound of a short period.)
4. Use the JOG/DATA dial to find a cue point while changing
the jog sound playback position.
5. When the cue point is determined, press the JOG PLAY
button to return to the Home screen.
NOTE
The transport button is available even in search mode.
However, while the timeline is displayed, pressing the PLAY
button switches between the normal playback and jog
sound playback, and pressing the STOP button performs
jog sound playback.
When in jog mode, you can move in 1/10 frame (1/300
seconds) units. You can also set IN and OUT points with 1/10
frame precision.

Repeat playback

Use the repeat playback function to play the same part again
and again.
The repeat playback interval is the section between the IN and
OUT points.

Setting IN/OUT points

In addition to setting the repeat playback interval, the IN and
OUT points are also used to set track editing intervals and as the
punch in and punch out points when automatically punching
in and out. Moreover, these points are used as the start and end
points of the mixdown master file when creating a master file.
You can set these points during recording, playback or when the
unit is stopped.
NOTE
The IN and OUT points cannot be set or edited in the
following cases.
• In Repeat Playback mode
• In
mode
Auto Punch
• In
mode of the Recorder mode
Mastering
Adding IN/OUT points
8
Regardless of whether the unit is stopped, playing back or
recording, when the recorder is at the desired position, press
and hold the MARK SET button and press the IN or OUT button.
The position where you pressed the IN/OUT button is set and
the time is displayed on the Home screen.
Locating IN/OUT points
8
When stopped or during playback, press the IN or OUT button.
45
TASCAM DP-24SD