Upgrading the Avaya Communication Manager software
Local configuration with S8300 Media Gateway
1. Connect the modem to a working telephone line. Note the telephone number of the line to
which you connect the modem, so that you can provide the number to the technician that
is performing or supervising the configuration.
2. Connect the USB modem to either of the two USB ports in the Avaya S8300 Server.
Note:
You may be required to enable the modem and port. For instructions on enabling
Note:
the modem, see
access
3. Connect a USB CD-ROM drive to the free USB port on the Avaya S8300 Server. Then,
insert the CD-ROM provided by Avaya into the CD-ROM drive.
Performing the upgrade
You can upgrade the S8300 software using Avaya IW or the Upgrade Tool. To upgrade S8300
software using Avaya IW, see
IW)
on page 129. For information about upgrading S8300 software using the upgrade tool, see
Chapter 9: Upgrading the G250 firmware
70 Installing and Upgrading the Avaya G250 Media Gateway
Chapter 4: Connecting and enabling a modem for remote
on page 49.
Appendix D: Running the Avaya Installation Wizard (Avaya
on page 71.