T4000 Upgrade Kit - Juniper T4000 Hardware Manual

T4000 Router Hardware Guide
Related
Documentation

T4000 Upgrade Kit

164
Fan Tray 1
Fan Tray 2
Remove all unsupported FPCs. To minimize downtime, you can upgrade FPCs that
2.
are supported on both the T640 router or T1600 router and the T4000 router before
the upgrade to a T4000 router.
NOTE: The following FPCs cannot be installed until all other hardware
components for the T4000 router have been installed.
T1600-FPC4-ES
not been upgraded. The
routers.
T4000-FPC5-3D
that have not been upgraded.
Overview of Upgrading to a T4000 Router on page 167
T4000 Upgrade Kit on page 164
The following hardware components are required for an upgrade from a Juniper Networks
T640 Core Router or T1600 Core Router to a T4000 Core Router.
Two redundant, load-sharing six-input DC power supplies (PWR-T-6-60-DC)
Five T4000 SIBs (SIB-I-T4000)
One T Series craft interface panel (CRAFT-T-SERIES)
Two front fan trays (FANTRAY-T4000)
One rear fan tray (FAN-REAR-TXP-LCC)
Two Routing Engines (RE-DUO-C1800-8G)
NOTE: RE-DUO-C1800-16G is also supported
Two control boards (CB-LCC)
You can order these components individually or order a T4000 upgrade kit that contains
all the components. You might need additional DC power cables.
NOTE: These components must be installed before you can install a T4000
FPC5 in the T4000 router.
FPCs cannot be installed on T640 routers that have
FPC is not supported on T640
T1600-FPC4-ES
FPCs cannot be installed on T640 or T1600 routers
Copyright © 2013, Juniper Networks, Inc.
FANTRAY-T-S
FAN-REAR-TX-T640-S