Installing A T4000 Management Ethernet Cable; Figure 97: Ethernet Port On Cip - Juniper T4000 Hardware Manual

Installing a T4000 Management Ethernet Cable

Related
Documentation
Copyright © 2013, Juniper Networks, Inc.

Figure 97: Ethernet Port on CIP

Plug one end of the replacement cable into the appropriate
1.
labeled HOST 0 connect to the Routing Engine in the upper Routing Engine slot (
and the ports labeled
HOST 1
Engine slot ( ).
RE1
Plug the other end of the cable into the network device.
2.
T4000 Connector Interface Panel (CIP) Description on page 27
Connecting the T4000 Router to a Management Ethernet Device on page 118
T4000 Routing Engine Interface Cable Specifications on page 350
Chapter 19: Replacing T4000 Router Hardware Components
connect to the Routing Engine in the lower Routing
port. The ports
ETHERNET
RE0 ),
227