Preparing To Upgrade To A T4000 Router; Overview Of Preparing To Upgrade To A T4000 Router - Juniper T4000 Hardware Manual

CHAPTER 15

Preparing to Upgrade to a T4000 Router

Overview of Preparing to Upgrade to a T4000 Router

Copyright © 2013, Juniper Networks, Inc.
Overview of Preparing to Upgrade to a T4000 Router on page 155
Checking the Hardware Version of T640 or T1600 Components on page 156
T4000 Upgrade Kit on page 164
To prepare to upgrade to a T4000 router:
Prepare the installation site for the T4000 router.
1.
See "Overview of Preparing the Site for the T4000 Router" on page
Determine which model numbers of the following components are already installed.
2.
See "Checking the Hardware Version of T640 or T1600 Components" on page
Routing Engines: RE-DUO-C1800-8G or RE-DUO-C1800-16G (supported on T640
or T1600 router)
Control boards: CB-LCC (supported on T640 or T1600 router)
Rear fan tray: FAN-REAR-TXP-LCC (supported on T1600 router only)
Power supplies: PWR-T-6-60-DC (supported on T640 or T1600 router)
Order the required hardware.
3.
The hardware upgrade kit includes two LCC-CBs, two RE-DUO-CI800-8G Routing
Engines, five SIB-I-T4000 SIBs, one FAN-REAR-TXP-LCC rear fan trays, two
FANTRAY-T4000 front fan trays, and two PWR-T-6-60-DC power supplies. If the
required control boards, Routing Engines, rear fan tray, or power supplies are already
installed in the T640 or T1600 router, you can also order the other hardware
components separately.
See the "T4000 Upgrade Kit" on page
Review all safety guidelines and warnings for both the T4000 router and T1600 router
4.
or T640 Router.
WARNING: To avoid harm to yourself or the router as you install and
maintain it, you must follow the safety procedures for working with Internet
164.
57.
156.
155