Appendix E T4000 Router Cable And Wire Specifications, Pinouts, And Guidelines; T4000 Network Cable Specifications And Guidelines; Network Cable And Transceiver Overview For T Series Routers - Juniper T4000 Hardware Manual

APPENDIX E
T4000 Router Cable and Wire
Specifications, Pinouts, and Guidelines

T4000 Network Cable Specifications and Guidelines

Network Cable and Transceiver Overview for T Series Routers

Copyright © 2013, Juniper Networks, Inc.
T4000 Network Cable Specifications and Guidelines on page 345
T4000 Routing Engine Interface Cable Specifications on page 350
T4000 Alarm Relay Contact Wire Specifications on page 350
RJ-45 Connector Pinouts for the T4000 Management ETHERNET Port on page 351
DB-9 Connector Pinouts for the Routing Engine AUXILIARY and CONSOLE
Ports on page 351
Network Cable and Transceiver Overview for T Series Routers on page 345
Understanding Fiber-Optic Cable Signal Loss, Attenuation, and Dispersion on page 347
Calculating Power Budget and Power Margin for Fiber-Optic Cables on page 348
Juniper Networks T Series Core Routers support a variety of fixed and pluggable
transceivers and network cable, including multimode and single-mode fiber-optic cable.
For a list of transceivers, see Supported Network Interface Standards by Transceiver.
To determine which transceivers and network cables are supported in a particular PIC,
see the "Cables and connectors" section in the Interface Module Reference for your router.
T320 Interface Module Reference
T640 Interface Module Reference
T1600 Interface Module Reference
T4000 Interface Module Reference
345