Connecting The T4000 Router To External Devices; Overview Of Connecting The T4000 Router To External Devices - Juniper T4000 Hardware Manual

CHAPTER 12
Connecting the T4000 Router to External
Devices

Overview of Connecting the T4000 Router to External Devices

Copyright © 2013, Juniper Networks, Inc.
Overview of Connecting the T4000 Router to External Devices on page 111
Tools and Parts Required to Connect the T4000 Router to External Devices on page 112
Connecting the T4000 Router to a Management Console or Auxiliary Device on page 112
Connecting the T4000 Router to an External Alarm-Reporting Device on page 114
Connecting the T4000 Router to an External Clocking Device on page 115
Connecting PIC Cables to the T4000 Router on page 116
Connecting the T4000 Router to a Management Ethernet Device on page 118
After you have grounded the T4000 Core Router, you can connect the following external
devices:
An external console or auxiliary device to the
Panel (CIP).
See "Connecting the T4000 Router to a Management Console or Auxiliary Device" on
page 112.
A laptop, modem, or other auxiliary device to the
See "Connecting the T4000 Router to a Management Console or Auxiliary Device" on
page 112.
A management network to the
See "Connecting the T4000 Router to a Management Ethernet Device" on page
An external alarm-reporting device to the alarm relay contacts on the CIP.
See "Connecting the T4000 Router to an External Alarm-Reporting Device" on page
An external clocking device to the
Generator with RJ-48 ports.
See "Connecting the T4000 Router to an External Clocking Device" on page
CONSOLE ports on the Connector Interface
AUXILIARY
ports on the CIP.
ETHERNET
EXTERNAL CLOCK INPUTS
ports on the CIP.
118.
114.
on the SONET Clock
115.
111