Installing The Small Shelf; Figure 33: Installing The Mounting Hardware For A Four-Post Rack Or Cabinet; Installing The T4000 Router Mounting Hardware - Juniper T4000 Hardware Manual

Installing the Small Shelf

Copyright © 2013, Juniper Networks, Inc.
Figure 33: Installing the Mounting Hardware for a Four-Post Rack or
Cabinet
To install the small shelf:
On the back of each rear rack rail, partially insert a mounting screw into the lowest
1.
hole specified in Table 27 on page 67
Install the small shelf on the back rack rails. Rest the bottom slot of each flange on a
2.
mounting screw. The small shelf installs on the back of the rear rails, extending toward
the center of the rack. The bottom of the small shelf on the rear rack rails must align
with the bottom of the large shelf on the front rack rails.
Partially insert screws into the open holes in the flanges of the small shelf.
3.
Tighten all the screws completely.
4.
Chapter 7: Installing the T4000 Router Mounting Hardware
for the small shelf.
69