Tools Required To Install The T4000 Router Without A Mechanical Lift; Removing T4000 Components From The Chassis - Juniper T4000 Hardware Manual

T4000 Router Hardware Guide

Tools Required to Install the T4000 Router Without a Mechanical Lift

Related
Documentation

Removing T4000 Components from the Chassis

86
To install the router, you need the following tools and parts:
Phillips (+) screwdrivers, numbers 1 and 2
Flat-blade (–) screwdriver, number 1
7/16-in. (11 mm) socket wrench
3/8-in. nut driver
ESD grounding wrist strap
Overview of Installing a T4000 Router Without a Mechanical Lift on page 85
Removing T4000 Components from the Chassis on page 86
Installing the T4000 Chassis in a Rack or Cabinet Manually on page 98
Reinstalling the T4000 Components in the Chassis on page 101
To make the router light enough to install manually, you must first remove most
components from the chassis. These removal procedures are for the initial installation
only, and assume that you have not connected any cables or power to the router.
Copyright © 2013, Juniper Networks, Inc.