T4000 Host Subsystem Overview; T4000 Host Subsystem Description - Juniper T4000 Hardware Manual

Table 11: FPCs Supported by the T4000 Router (continued)
FPC
Type FPC Name
Enhanced
Scaling
FPC4-1P
5 T4000 FPC5
Related
Documentation

T4000 Host Subsystem Overview

T4000 Host Subsystem Description

Related
Documentation
Copyright © 2013, Juniper Networks, Inc.
FPC Model
Number CLI Name
T640-FPC4-1P-ES FPC Type 4.1-ES
NOTE: T640-FPC4-ES
is not supported.
T4000-FPC5-3D
FPC Type 5-3D
T4000-FPC5-LSR FPC Type 5 -LSR
T4000 FPC Description
T4000 PIC/FPC Compatibility
T4000 Interface Module Reference
T4000 Host Subsystem Description on page 35
T4000 Control Board Overview on page 36
T4000 Routing Engine Overview on page 39
The host subsystem provides the routing and system management functions of the
router. The host subsystem consists of a Routing Engine and an adjacent control board.
To operate, each host subsystem functions as a unit; the Routing Engine requires the
corresponding control board, and vice versa.
NOTE: You can install one or two host subsystems on the router. We
recommend that you install two host subsystems for redundant protection.
If you install only one host subsystem, we recommend that you install it in
slots and
RE0 CB0
Each host subsystem has three LEDs, located on the upper right of the craft interface,
that display its status. In addition, there are LEDs on each Routing Engine and control
board.
T4000 Routing Engine Description on page 39
T4000 RE-C1800 Routing Engine Description on page 40
T4000 LCC-CB on page 37
Chapter 3: T4000 Hardware Components Overview
Maximum
Maximum Throughput per
Number of PICs FPC
1 100 Gbps
2 240 Gbps
2 240 Gbps
.
First Junos OS
Release
Supported
12.1R2
12.1
12.3R2
13.1
35