Providing Power To The T4000 Router; Tools And Parts Required To Provide Power To The T4000 Router; Connecting Power To The T4000 Router - Juniper T4000 Hardware Manual

CHAPTER 13

Providing Power to the T4000 Router

Tools and Parts Required to Provide Power to the T4000 Router

Related
Documentation

Connecting Power to the T4000 Router

Copyright © 2013, Juniper Networks, Inc.
Tools and Parts Required to Provide Power to the T4000 Router on page 121
Connecting Power to the T4000 Router on page 121
Powering On the T4000 Router on page 141
Powering Off the T4000 Router on page 142
To connect the router to power, you need the following tools and parts:
DC-powered routers: 7/16-in. (11 mm) hexagonal-head external drive nut driver, with
a torque range between 23 lb-in. (2.6 Nm) and 25 lb-in. (2.8 Nm), for tightening nuts
to terminal studs on each power supply on a DC-powered router.
Torque-controlled tool.
CAUTION: You must use an appropriate torque-controlled tool to tighten
the nuts. Applying excessive torque damages the terminal studs and the
power supply. The absolute maximum torque that may be applied to this
nut is 45 in-lb (5.0 Nm).
DC power cables and lugs. See
page 341.
Connecting DC Power to the T4000 Router (Six 60-A Inputs) on page 122
Connecting DC Power to the T4000 Router (Five 60-A Inputs) on page 126
Connecting DC Power to the T4000 Router (Four 60-A Inputs) on page 130
Connecting DC Power to the T4000 Router (Three 80-A DC Power Cables to Six 60-A
Inputs) on page 133
Connecting DC Power to the T4000 Router (Six 60-A Inputs) on page 122
Connecting DC Power to the T4000 Router (Five 60-A Inputs) on page 126
"T4000 DC Power Cable and Lugs Specifications" on
121