Figure 66: Attaching A Cable To A Pic - Juniper T4000 Hardware Manual

Hide thumbs Also See for T4000:

Table of Contents

Documentation

as it hangs to the floor. Place excess cable out of the way in a neatly coiled loop.

Placing fasteners on the loop helps to maintain its shape.

Avoid bending fiber-optic cable beyond its minimum bend

radius. An arc smaller than a few inches in diameter can damage the cable

and cause problems that are difficult to diagnose.

Do not let fiber-optic cable hang free from the connector. Do

not allow fastened loops of cable to dangle, which stresses the cable at

the fastening point.

Figure 66: Attaching a Cable to a PIC

T4000 PIC Description on page 42

Overview of Connecting the T4000 Router to External Devices on page 111

Chapter 12: Connecting the T4000 Router to External Devices

Fiber-optic cable