Maintaining T4000 Router Hardware Components; Chapter 17 Maintaining T4000 Router Hardware Components; Tools And Parts Required To Maintain The T4000 Hardware Components; Routine Maintenance Procedures For The T4000 Router - Juniper T4000 Hardware Manual

CHAPTER 17
Maintaining T4000 Router Hardware
Components

Tools and Parts Required to Maintain the T4000 Hardware Components

Related
Documentation

Routine Maintenance Procedures for the T4000 Router

Purpose
Action
Copyright © 2013, Juniper Networks, Inc.
Tools and Parts Required to Maintain the T4000 Hardware Components on page 179
Routine Maintenance Procedures for the T4000 Router on page 179
Maintaining T4000 Cooling System Components on page 180
Maintaining the T4000 Routing Engine and Control Boards on page 182
Maintaining T4000 FPCs on page 184
Maintaining T4000 PICs on page 184
Maintaining PIC Cables on page 185
Maintaining the T4000 Power System on page 186
Maintaining the T4000 SIBs on page 186
Maintaining the T4000 SCGs on page 187
To maintain the hardware components, you need the following tools and parts:
ESD grounding wrist strap
Flat-blade (–) screwdriver
Phillips (+) screwdriver, number 1
Phillips (+) screwdriver, number 2
Routine Maintenance Procedures for the T4000 Router on page 179
For optimum router performance, perform preventive maintenance procedures.
On a regular basis:
Inspect the installation site for moisture, loose wires or cables, and excessive dust.
Make sure that airflow is unobstructed around the router and into the air intake vents.
179