Checking The Hardware Version Of T640 Or T1600 Components; Checking The Hardware Version Of The Control Boards - Juniper T4000 Hardware Manual

T4000 Router Hardware Guide
Related
Documentation

Checking the Hardware Version of T640 or T1600 Components

Checking the Hardware Version of the Control Boards

156
routers, as well as the guidelines and warnings for working with and near
electrical equipment. However, providing an exhaustive set of guidelines
for working with electrical equipment is beyond the scope of this
documentation.
See "General Safety Guidelines for Juniper Networks Devices" on page 293
Safety Warnings for Juniper Networks Devices" on page
Upgrade the software on the T1600 router or T640 router to Junos OS Release 12.1
5.
or later. Support of some hardware or software features require Junos OS Release
12.1R2 or later. For information about upgrading the software, see the Installation and
Upgrade Guide.
Delete unsupported configurations from the T640 or T1600 router.
6.
For example, the following CoS configuration is not supported for T4000 routers:
Hierarchy Level [edit class-of-service schedulers scheduler-name] drop-profile-map
loss-priority (any | low | medium-low | medium-high | high) protocol (any| non-tcp |
tcp) drop-profile profile-name.
For the T4000 router, any
statement. The
non-tcp
Hierarchy Level [edit class-of-service schedulers scheduler-name] drop-profile-map
loss-priority (any | low | medium-low | medium-high | high) protocol any
drop-profileprofile-name.
T4000 Router Description on page 3
T4000 Hardware Component Overview on page 13
Checking the Hardware Version of the Control Boards on page 156
1.
Checking the Hardware Version of the Routing Engines on page 158
2.
Checking the Hardware Version of the Rear Fan Tray on page 160
3.
Checking the Hardware Version of the FPCs on page 162
4.
The control board model number LCC-CB is required for the T4000 router.
The following control boards are not supported for the T4000 router:
CB-L-T
CB-T
To determine which model numbers of control boards are installed:
Issue the show chassis hardware models
1.
is the only protocol option supported for the following
and options are not supported,
tcp
command:
and "General
294.
Copyright © 2013, Juniper Networks, Inc.