Configure The Ipv6 Internet Connection And Wan Settings - NETGEAR ProSAFE SRX5308 Reference Manual

5. Configure the DDNS service settings as described in the following table:
Table 8. DDNS service settings
Setting
WAN1 (... Status: ...)
Select the Yes radio button to enable the DDNS service. The fields that display on the screen depend on
the DDNS service provider that you have selected. Enter the following settings:
Host and Domain Name
Username or
User Email Address
Password or User Key
Use wildcards
Update every 30 days
WAN2 (... Status: ...)
WAN3 (... Status: ...)
WAN4 (... Status: ...)
See the information for WAN1 about how to enter the settings. You can select different DDNS services for
different WAN interfaces.
6. Click Apply to save your configuration.
Configure the IPv6 Internet Connection and WAN
Settings
• Configure the IPv6 Routing Mode
• Use a DHCPv6 Server to Configure an IPv6 Internet Connection
• Configure a Static IPv6 Internet Connection
• Configure a PPPoE IPv6 Internet Connection
• Configure 6to4 Automatic Tunneling
• Configure ISATAP Automatic Tunneling
• View the Tunnel Status and IPv6 Addresses
• Configure Stateless IP/ICMP Translation
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Description
The host and domain name for the DDNS service.
The user name or email address for DDNS server authentication.
The password that is used for DDNS server authentication.
If your DDNS provider allows the use of wildcards in resolving your URL, you
can select the Use wildcards check box to activate this feature. For example,
the wildcard feature causes *.yourhost.dyndns.org to be aliased to the same IP
address as yourhost.dyndns.org.
If your WAN IP address does not often change, you might need to force a
periodic update to the DDNS service to prevent your account from expiring. If
the Update every 30 days check box displays, select it to enable a periodic
update.
IPv4 and IPv6 Internet and WAN Settings
52