NETGEAR ProSAFE SRX5308 Reference Manual page 364

ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Table 90. Firewall Logs & E-mail screen settings (continued)
Setting Description
Enable E-mail Logs
Do you want Select the Yes radio button to enable the VPN firewall to email logs to a specified email
logs to be address. Complete the fields that are shown on the right side of the screen.
emailed to Select the No radio button to prevent the logs from being emailed, which is the default
you? setting.
E-Mail Server Address The IP address or Internet name of your ISP's outgoing email
Return E-Mail Address The email address of the sender for email identification purposes.
Send to E-Mail
Address
Custom SMTP Port
Select one of the following radio buttons to specify SMTP server authentication for the
outgoing email:
• No Authentication. The SMTP server does not require authentication.
• Login Plain. The SMTP server requires authentication with regular login. Specify the
user name and password to be used for authentication.
• CRAM-MD5. The SMTP server requires authentication with CRAM-MD5 login. Specify
the user name and password to be used for authentication.
Username
Password
Respond to Identd
from SMTP Server
Send e-mail logs by Schedule
Unit Enter a schedule for sending the logs. From the Unit drop-down list, select one of the
following:
• Never. No logs are sent.
• Hourly. The logs are sent every hour.
• Daily. The logs are sent daily. Specify the time.
• Weekly. The logs are sent weekly. Specify the day and time.
Day From the Day drop-down list, select the day on which the logs are sent.
Time From the Time drop-down list, select the hour on which the logs are sent, and select either
the a.m. or p.m. radio button.
SMTP server.
Note: If you leave this field blank, the VPN firewall cannot send
email logs and alerts.
For example, enter srx_alerts@company.com.
The email address to which the logs are sent. Typically, this is the
email address of the administrator.
Enter the port number of the SMTP server for the outgoing email.
The user name for SMTP server authentication.
The password for SMTP server authentication.
To respond to Ident protocol messages, select the Respond to
Identd from SMTP Server check box. The Ident protocol is a
relatively weak scheme to verify the sender of an email. (A
common daemon program for providing the Ident service is
Identd.)
Monitor System Access and Performance
364