NETGEAR ProSAFE SRX5308 Reference Manual page 2

ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your product and use it to register your product
at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR website. For product updates and web
support, visit http://support.netgear.com.
Phone (US & Canada only): 1-888-NETGEAR.
Phone (Other Countries): Check the list of phone numbers at
http://support.netgear.com/general/contact/default.aspx.
Trademarks
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change
without notice. © NETGEAR, Inc. All rights reserved.
Revision History
Publication Version
Part Number
202-10536-05 –
202-10536-04 1.0
Publish Date Comments
April 2013 Added the following features:
• Auto-rollover support with failure detection for IPv6 WAN
interfaces (see
and
the Wizard)
• Multicast pass-through with alternate networks (see
Multicast Pass-Through for IPv4
• SNMP access from the WAN and SNMP trap events (see
a Simple Network Management Protocol
• Option to define what constitutes a UCP flood attack (see
Attack
• Authentication and encryption for the PPTP server (see
Configure the PPTP
• Authentication for the L2TP server (see
Server)
• Option to select a gateway when you ping or send a trace
packet and option to select a VPN policy when you ping or
send a trace packet through a VPN tunnel (see
Packet
July 2012 A major revision. Added the following features:
• Support for IPv6 with multiple IPv6 features, including a new
general menu structure that provides both IPv4 and IPv6
radio buttons (very extensive revisions throughout the
manual)
• IPSec VPN autoinitiate support (see
VPN
• SNMPv3 support (see
Protocol
• Option to reboot with a different firmware version (see
the Firmware and Reboot the VPN
• Extensive list of factory default settings (see
Default Settings and Technical
Configure Auto-Rollover for IPv6 Interfaces
Create an IPv6 Gateway-to-Gateway VPN Tunnel with
Checks)
Server)
and Trace a Route)
Policy)
Use a Simple Network Management
Manager)
2
Configure
Traffic)
Use
Manager)
Configure the L2TP
Send a Ping
Manually Add or Edit a
Select
Firewall)
Appendix A,
Specifications)