Create Ip Groups - NETGEAR ProSAFE SRX5308 Reference Manual

Figure 106.
2. Modify the settings that you wish to change (see the previous table).
3. Click Apply to save your changes. The modified service is displayed in the Custom Services
table.

To delete one or more services:
1. In the Custom Services table, select the check box to the left of each service that you
want to delete, or click the Select All table button to select all services.
2. Click the Delete table button.

Create IP Groups

An IP group contains a collection of individual IP addresses that do not need to be within the
same IP address range. You specify an IP group as either a LAN group or WAN group and
use the group as a firewall object to which you apply a firewall rule.

To create an IP group:
1. Select Security > Services > IP Groups. The IP Groups screen displays. (The
following figure shows two groups in the Custom IP Groups Table as examples.)
Figure 107.
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Firewall Protection
179