NETGEAR ProSAFE SRX5308 Reference Manual page 191

Note: For additional ways of restricting outbound traffic, see
Rules (Service Blocking)

To enable MAC filtering and add MAC addresses to be permitted or blocked:
1. Select Security > Address Filter. The Address Filter submenu tabs display, with the
Source MAC Filter screen in view. (The following figure shows one address in the MAC
Addresses table as an example.)
Figure 115.
2. In the MAC Filtering Enable section, select the Yes radio button.
3. In the same section, from the Policy for MAC Addresses listed below drop-down list, select
one of the following options:
• Block and Permit the rest. Traffic coming from all addresses in the MAC Addresses
table is blocked. Traffic from all other MAC addresses is permitted.
• Permit and Block the rest. Traffic coming from all addresses in the MAC Addresses
table is permitted. Traffic from all other MAC addresses is blocked.
4. Click Apply to save your settings. The MAC Address field in the Add Source MAC Address
section of the screen now becomes available.
5. Build your list of source MAC addresses to be permitted or blocked by entering the first MAC
address in the MAC Address field. A MAC address needs to be entered in the format
xx:xx:xx:xx:xx:xx, in which x is a numeric (0 to 9) or a letter between a and f (inclusive), for
example: aa:11:bb:22:cc:33.
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
on page 137.
Firewall Protection
191
Outbound