NETGEAR ProSAFE SRX5308 Reference Manual page 38

ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Table 4. Internet IP address settings
Setting Description
Get Dynamically If your ISP has not assigned you a static IP address, select the Get Dynamically from
from ISP ISP radio button. The ISP automatically assigns an IP address to the VPN firewall using
DHCP network protocol.
Client Identifier
Vendor Class Identifier
Use Static IP If your ISP has assigned you a fixed (static or permanent) IP address, select the Use
Address Static IP Address radio button, and enter the following settings:
IP Address
IP Subnet Mask
Gateway IP Address
8. In the Domain Name Server (DNS) Servers section of the screen (see the following figure),
specify the DNS settings as described in the following table.
Figure 18.
If your ISP requires client identifier information to assign an IP
address using DHCP, select the Client Identifier check box,
and enter the client identifier information in the field.
If your ISP requires the vendor class identifier information to
assign an IP address using DHCP, select the Vendor Class
Identifier check box.
The static IP address assigned to you. This address identifies
the VPN firewall to your ISP.
The subnet mask is usually provided by your ISP.
The IP address of the ISP's gateway is usually provided by
your ISP.
IPv4 and IPv6 Internet and WAN Settings
38