NETGEAR ProSAFE SRX5308 Reference Manual page 294

.
Figure 193. Add SSL VPN Policy screen for IPv6
4. Complete the settings as described in the following table:
Table 74. Add SSL VPN Policy screen settings
Setting Description
Policy For
Select one of the following radio buttons to specify the type of SSL VPN policy:
• Global. The new policy is global and includes all groups and users.
• Group. The new policy needs to be limited to a single group. From the drop-down list, select a group
name. For information about how to create groups, see
• User. The new policy needs to be limited to a single user. From the drop-down list, select a user name.
For information about how to create user accounts, see
Add SSL VPN Policies
Apply Select one of the following radio buttons to specify how the policy is applied. When you select
Policy to? a radio button, the fields and drop-down lists that apply to your selection (see explanations
later in this table) unmask onscreen.
•
•
•
•
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Network Resource. The policy is applied to a network resource that you have defined on
the Resources screen (see
page 288).
IP Address. The policy is applied to a single IP address.
IP Network. The policy is applied to a network address.
All Addresses. The policy is applied to all addresses.
Virtual Private Networking Using SSL Connections
Configure Groups
Configure User Accounts
Use Network Resource Objects to Simplify Policies
294
on page 307.
on page 310.
on