How to Manually Configure Your Internet Connection
You can manually configure your firewall using the menu below, or you can allow the Setup
Wizard to determine your configuration as described in the previous section.
ISP Does Not Require Login
Figure 3-10: Browser-based configuration Basic Settings menu
You can manually configure the firewall using the Basic Settings menu shown in
using these steps:
Log in to the firewall at its default address of
1.
Explorer or Netscape
Connecting the Firewall to the Internet
Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
Navigator.
®
ISP Does Require Login
http://192.168.0.1
M-10146-01
Figure 3-10
using a browser like Internet
3-13