NETGEAR ProSAFE SRX5308 Reference Manual page 372

ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 237.
The following table explains the fields of the Router Statistics screen.
To change the poll interval period, enter a new value (in seconds) in the Poll Interval field,
and click Set interval. To stop polling, click Stop.
Table 92. Router Statistics screen information
Item
System up Time. The period since the last time that the VPN firewall was started up.
Router Statistics
The following statistics are displayed for each of the four WAN interfaces, for all LAN interfaces combined,
and for the DMZ interface:
Tx Pkts
Rx Pxts
Collisions
Tx B/s
Rx B/s
Up Time
Detailed Status Screen
To view the Detailed Status screen, select Monitoring > Router Status > Detailed Status.
The Detailed Status screen displays:
Description
The number of packets transmitted on the port in bytes.
The number of packets received on the port in bytes.
The number of signal collisions that have occurred on the port. A collision occurs
when the port attempts to send data at the same time as a port on the other router or
computer that is connected to this port.
The number of bytes transmitted per second on the port.
The number of bytes received per second on the port.
The period that the port has been active since it was restarted.
Monitor System Access and Performance
372