NETGEAR ProSAFE SRX5308 Reference Manual page 319

ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 211.
3. Change the settings as described in the following table:
Note: Once established, you cannot change the user name or the group. If
you need to change the user name or the group, delete the user
account and recreate it with the correct name or group.
Table 81. Edit User screen settings
Setting Description
Select User From the drop-down list, select one of the predefined user types that determines the
Type access credentials:
• SSL VPN User. User who can log in only to the SSL VPN portal.
• Administrator. User who has full access and the capacity to change the VPN firewall
configuration (that is, read/write access).
• Guest (readonly). User who can only view the VPN firewall configuration (that is,
read-only access).
• IPSEC VPN User. You cannot change an existing user from the IPSEC VPN User
type to another type or from another type to the IPSEC VPN User type.
• L2TP User. You cannot change an existing user from the L2TP User type to another
type or from another type to the L2TP User type.
• PPTP User. You cannot change an existing user from the PPTP User type to another
type or from another type to the PPTP User type.
Check to Edit Select this check box to make the password fields accessible to modify the password.
Password
Enter Your Password
New Password
Confirm New Password
Idle Timeout The period after which an idle user is automatically logged out of the web management
interface. The default idle time-out period is 5 minutes.
4. Click Apply to save your settings.
Manage Users, Authentication, and VPN Certificates
Enter the password with which you have logged in.
Enter the new password.
Reenter the new password for confirmation.
319