NETGEAR ProSAFE SRX5308 Reference Manual page 296

Table 74. Add SSL VPN Policy screen settings (continued)
Setting Description
Apply IP Network
Policy to? (continued)
(continued)
All
Addresses
5. Click Apply to save your settings. The policy is added to the List of SSL VPN Policies table
on the Policies screen. The new policy goes into effect immediately.
Note: If you have configured SSL VPN user policies, make sure that
secure HTTP remote management is enabled (see
Remote Management Access
management is not enabled, all SSL VPN user connections are
disabled.

To edit an SSL VPN policy:
1. On the Policies screen (see
column for the SSL VPN policy that you want to modify. The Edit SSL VPN Policy
screen displays. This screen is identical to the Add SSL VPN Policy screen (see the
previous figure).
2. Modify the settings as described in the previous table.
3. Click Apply to save your settings.
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Service From the drop-down list, select the service to which the SSL
VPN policy is applied:
•
•
•
Permission From the drop-down list, select Permit or Deny to specify
whether the policy permits or denies access.
Policy Name A descriptive name of the SSL VPN policy for identification and
management purposes.
Port Range / A port (fill in the Begin field) or a range of ports (fill in the Begin
Port Number and End fields) to which the SSL VPN policy is applied. Ports
can be 0 through 65535. The policy is applied to all TCP and
UDP traffic that passes on those ports. Leave the fields blank to
apply the policy to all traffic.
Service From the drop-down list, select the service to which the SSL
VPN policy is applied:
•
•
•
Permission From the drop-down list, select Permit or Deny to specify
whether the policy permits or denies access.
Figure 191
Virtual Private Networking Using SSL Connections
VPN Tunnel. The policy is applied only to a VPN tunnel.
Port Forwarding. The policy is applied only to port
forwarding.
All. The policy is applied both to a VPN tunnel and to port
forwarding.
VPN Tunnel. The policy is applied only to a VPN tunnel.
Port Forwarding. The policy is applied only to port
forwarding.
All. The policy is applied both to a VPN tunnel and to port
forwarding.
Configure
on page 338). If secure HTTP remote
on page 292), click the Edit button in the Action
296