NETGEAR ProSAFE SRX5308 Reference Manual page 312

ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 206.
3. Enter the settings as described in the following table:
Table 78. Add Users screen settings
Setting Description
User Name A descriptive (alphanumeric) name of the user for identification and management
purposes.
User Type From the drop-down list, select one of the predefined user types that determines the
access credentials:
•
•
•
•
•
•
Select Group The drop-down list shows the groups that are listed on the Group screen. From the
drop-down list, select the group to which the user is assigned. For information about
how to configure groups, see
Note:
Password The password that the user needs to enter to gain access to the VPN firewall.
Confirm Password This field needs to be identical to the password that you entered in the Password field.
Idle Timeout The period after which an idle user is automatically logged out of the web management
interface. The default idle time-out period is 5 minutes.
4. Click Apply to save your settings. The user is added to the List of Users table.
Manage Users, Authentication, and VPN Certificates
SSL VPN User. A user who can log in only to the SSL VPN portal.
Administrator. A user who has full access and the capacity to change the VPN
firewall configuration (that is, read/write access).
Guest (readonly). A user who can only view the VPN firewall configuration (that
is, read-only access).
IPSEC VPN User. A user who can make an IPSec VPN connection only through
a NETGEAR ProSafe VPN Client, and only when the XAUTH feature is enabled
(see Configure Extended Authentication (XAUTH)
L2TP User. A user who can connect over an L2TP connection to an L2TP client
that is located behind the VPN firewall.
PPTP User. A user who can connect over a PPTP connection to a PPTP client
that is located behind the VPN firewall.
Configure Groups
The user is assigned to the domain that is associated with the selected group.
312
on page 245).
on page 307.