NETGEAR ProSAFE SRX5308 Reference Manual page 130

ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
3. Enter the settings as described in the following table:
Table 30. RIP Configuration screen settings
Setting
RIP
RIP Direction
RIP Version
Authentication for RIP-2B/2M
Authentication for
RIP-2B/2M required?
Description
From the RIP Direction drop-down list, select the direction in which the VPN
firewall sends and receives RIP packets:
• None. The VPN firewall neither advertises its route table, nor accepts any RIP
packets from other routers. This effectively disables RIP, and is the default
setting.
• In Only. The VPN firewall accepts RIP information from other routers but does
not advertise its routing table.
• Out Only. The VPN firewall advertises its routing table but does not accept
RIP information from other routers.
• Both. The VPN firewall advertises its routing table and also processes RIP
information received from other routers.
By default, the RIP version is set to Disabled. From the RIP Version drop-down list,
select the version:
• RIP-1. Classful routing that does not include subnet information. This is the
most commonly supported version.
• RIP-2. Routing that supports subnet information. Both RIP-2B and RIP-2M
send the routing data in RIP-2 format:
- RIP-2B. Sends the routing data in RIP-2 format and uses subnet
broadcasting.
- RIP-2M. Sends the routing data in RIP-2 format and uses multicasting.
Authentication for RP-2B or RIP-2M is disabled by default, that is, the No radio
button is selected. To enable authentication for RP-2B or RIP-2M, select the Yes
radio button, and enter the settings for the following fields.
First Key Parameters
MD5 Key Id The identifier for the key that is used for authentication.
MD5 Auth Key The password that is used for MD5 authentication.
Not Valid Before The beginning of the lifetime of the MD5 key. Enter the month,
date, year, hour, minute, and second. Before this date and
time, the MD5 key is not valid.
Not Valid After The end of the lifetime of the MD5 key. Enter the month, date,
year, hour, minute, and second. After this date and time, the
MD5 key is no longer valid.
Second Key Parameters
MD5 Key Id The identifier for the key that is used for authentication.
MD5 Auth Key The password that is used for MD5 authentication.
LAN Configuration
130