NETGEAR ProSAFE SRX5308 Reference Manual page 124

ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 67.
4. Enter the settings as described in the following table:
Table 27. RADVD screen settings for the DMZ
Setting Description
RADVD Status Specify the RADVD status by making a selection from the drop-down list:
•
•
Advertise Mode Specify the advertisement mode by making a selection from the drop-down list:
•
•
Advertise Interval Enter the advertisement interval of unsolicited multicast packets in seconds. The
minimum value is 10 seconds; the maximum value is 1800 seconds.
Enable. The RADVD is enabled, and the RADVD fields become available for you
to configure.
Disable. The RADVD is disabled, and the RADVD fields are masked out. This is
the default setting.
Unsolicited Multicast. The VPN firewall advertises unsolicited multicast packets
at a rate that is specified by the advertisement interval.
Unicast only. The VPN firewall responds to unicast packet requests only. No
unsolicited packets are advertised. Select this option for nonbroadcast multiple
access (NBMA) links such as ISATAP.
LAN Configuration
124