NETGEAR ProSAFE SRX5308 Reference Manual page 232

Figure 158.
Each policy contains the data that are described in the following table. These fields are
described in more detail in
Table 53. IKE Policies screen information for IPv4 and IPv6
Item
Name
Mode
Local ID
Remote ID
Encr
Auth
DH

To delete one or more IKE polices:
1. Select the check box to the left of each policy that you want to delete, or click the Select
All table button to select all IKE policies.
2. Click the Delete table button.
For information about how to add or edit an IKE policy, see
Policy on page 233.
Virtual Private Networking Using IPSec and L2TP Connections
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Table 54 on page 234.
Description
The name that identifies the IKE policy. When you use the VPN Wizard to set up a VPN
policy, an accompanying IKE policy is automatically created with the same name that you
select for the VPN policy.
Note: The name is not supplied to the remote VPN endpoint.
The exchange mode: Main or Aggressive.
The IKE/ISAKMP identifier of the VPN firewall. The remote endpoint needs to have this
value as its remote ID.
The IKE/ISAKMP identifier of the remote endpoint, which needs to have this value as its
local ID.
The encryption algorithm that is used for the IKE security association (SA). This setting
needs to match the setting on the remote endpoint.
The authentication algorithm that is used for the IKE SA. This setting needs to match the
setting on the remote endpoint.
The Diffie-Hellman (DH) group that is used when keys are exchanged. This setting needs
to match the setting on the remote endpoint.
Manually Add or Edit an IKE
232