View Policies - NETGEAR ProSAFE SRX5308 Reference Manual

includes the following addresses: 10.0.0.5–10.0.0.20 and the FQDN ftp.company.com,
which resolves to 10.0.1.3.
Assuming that no conflicting user or group policies have been configured, if a user attempted
to access FTP servers at the following addresses, the actions listed would occur:
• 10.0.0.1. The user would be blocked by Policy 1.
• 10.0.1.5. The user would be blocked by Policy 2.
• 10.0.0.10. The user would be granted access by Policy 3. The IP address range
10.0.0.5–10.0.0.20 is more specific than the IP address range that is defined in Policy 1.
• ftp.company.com. The user would be granted access by Policy 3. A single host name is
more specific than the IP address range that is configured in Policy 2.
Note: The user would not be able to access ftp.company.com using its IP
address 10.0.1.3. The VPN firewall's policy engine does not perform
reverse DNS lookups.

View Policies


To view the existing SSL VPN policies:
1. Select VPN > SSL VPN. The SSL VPN submenu tabs display, with the Policies screen
in view. (The following figure shows some examples.)
Figure 191.
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Virtual Private Networking Using SSL Connections
292