NETGEAR ProSAFE SRX5308 Reference Manual page 63

ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Table 10. WAN IPv6 ISP Settings screen settings for a PPPoE IPv6 connection (continued)
Setting
DHCPv6 Option
Primary DNS Server
Secondary DNS Server If you have selected the Disable-DHCPv6 from the DHCPv6 Options drop-down
6. Click Apply to save your changes.
7. Verify the connection:
a. Select Network Configuration > WAN Settings > WAN Setup.
b. In the upper right of the screen, select the IPv6 radio button. The WAN Setup screen
displays the IPv6 settings (see
c. In the Action column, click the Status button of the WAN interface for which you
want to display the Connection Status pop-up screen. (See
which shows a static IP address configuration; the screen for PPPoE is similar.)
The Connection Status screen should show a valid IP address and gateway, and you are
connected to the Internet. If the configuration was not successful, see
ISP Connection on page 396.
Note: For more information about the Connection Status screen, see
the WAN Port Status
Description
From the DHCPv6 Option drop-down list, select one of the following DHCPv6
server options, as directed by your ISP:
• Disable-DHCPv6. DHCPv6 is disabled. You need to specify the DNS servers
in the Primary DNS Server and Secondary DNS Server fields in order to
receive an IP address from the ISP.
• DHCPv6 StatelessMode. The VPN firewall generates its own IP address by
using a combination of locally available information and router
advertisements, but receives DNS server information from the ISP's DHCPv6
server. Router advertisements include a prefix that identifies the subnet that
is associated with the WAN port. The IP address is formed by combining this
prefix and the MAC address of the WAN port. The IP address is a dynamic
address.
• DHCPv6 StatefulMode. The VPN firewall obtains an interface address,
configuration information such as DNS server information, and other
parameters from the ISP's DHCPv6 server. The IP address is a dynamic
address.
• DHCPv6 Prefix Delegation. The VPN firewall obtains a prefix from the ISP's
DHCPv6 server through prefix delegation, for example, 2001:db8:: /64. The
VPN firewall's own stateless DHCPv6 server can assign this prefix to its IPv6
LAN clients. For more information about prefix delegation, see
DHCPv6 Server With Prefix Delegation
If you have selected the Disable-DHCPv6 from the DHCPv6 Options drop-down
list, the IPv6 IP address of the ISP's primary DNS server.
list, the IPv6 IP address of the ISP's secondary DNS server.
Figure 35
on page 382.
IPv4 and IPv6 Internet and WAN Settings
63
on page 103.
on page 61).
Figure 34
Stateless
on page 60,
Troubleshoot the
View