How To Manually Configure Your Internet Connection - NETGEAR ProSafe FVS114 Reference Manual

How to Manually Configure Your Internet Connection

You can manually configure your firewall using the menu below, or you can allow the Setup
Wizard to determine your configuration as described in the previous section.
ISP Does Not Require Login
Figure 3-9: Browser-based configuration Basic Settings menu
You can manually configure the firewall using the Basic Settings menu shown in
these steps:
Log in to the firewall at its default address of http://www.routerlogin.net using a browser like
1.
Internet Explorer or Netscape
Click the Basic Settings link under the Setup section of the main menu.
2.
If your Internet connection does not require a login, click No at the top of the Basic Settings
3.
menu and fill in the settings according to the instructions below. If your Internet connection
does require a login, click Yes, and skip to step 4.
Connecting the Firewall to the Internet
Reference Manual for the ProSafe VPN Firewall FVS114
® Navigator.
202-10098-01, April 2005
ISP Does Require Login
Figure 3-9 using
3-11