NETGEAR ProSAFE SRX5308 Reference Manual page 116

ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 64.
2. Enter the settings as described in the following table:
Table 23. DMZ Setup screen settings for IPv4
Setting
DMZ Port Setup
Do you want to
enable DMZ Port?
Description
Select one of the following radio buttons:
• Yes. Enables you to configure the DMZ port settings. Fill in the IP Address and
Subnet Mask fields.
• No. Allows you to disable the DMZ port after you have configured it.
IP Address Enter the IP address of the DMZ port. Make sure that the DMZ
port IP address and LAN port IP address are in different
subnets (for example, an address outside the LAN DHCP
address pool, such as 192.168.1.101 when the LAN DHCP
pool is 192.168.1.2–192.168.1.100). The default IP address for
the DMZ port 176.16.2.1.
Subnet Mask Enter the IP subnet mask of the DMZ port. The subnet mask
specifies the network number portion of an IP address. The
subnet mask for the DMZ port is 255.255.255.0.
LAN Configuration
116