NETGEAR ProSAFE SRX5308 Reference Manual page 138

ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Table 33. Outbound rules overview (continued)
Setting Description
Select Schedule The time schedule (that is, Schedule1, Schedule2, or Schedule3)
that is used by this rule.
• This drop-down list is activated only when BLOCK by
schedule, otherwise allow or ALLOW by schedule, otherwise
block is selected as the action.
• Use the Schedule screen to configure the time schedules (see
Set a Schedule to Block or Allow Specific Traffic
LAN Users The settings that determine which computers on your network are
affected by this rule. The options are:
• Any. All computers and devices on your LAN.
• Single address. Enter the required address in the Start field
to apply the rule to a single device on your LAN.
• Address range. Enter the required addresses in the Start and
Finish fields to apply the rule to a range of devices.
• Group. Select the LAN group to which the rule applies. Use
the LAN Groups screen to assign computers to groups (see
Manage the Network Database
only to IPv4 rules.
• IP Group. Select the IP group to which the rule applies. Use
the IP Groups screen to assign IP addresses to groups. See
Create IP Groups
WAN Users The settings that determine which Internet locations are covered
by the rule, based on their IP address. The options are:
• Any. All Internet IP addresses are covered by this rule.
• Single address. Enter the required address in the Start field.
• Address range. Enter the required addresses the Start and
Finish fields.
• IP Group. Select the IP group to which the rule applies. Use
the IP Groups screen to assign IP addresses to groups. See
Create IP Groups
DMZ Users The settings that determine which DMZ computers on the DMZ
network are affected by this rule. The options are:
• Any. All computers and devices on your DMZ network.
• Single address. Enter the required address in the Start field
to apply the rule to a single computer on the DMZ network.
• Address range. Enter the required addresses in the Start and
Finish fields to apply the rule to a range of DMZ computers.
on page 97). Groups apply
on page 179.
on page 179.
Firewall Protection
138
Outbound Rules
All rules when BLOCK
by schedule, otherwise
allow or ALLOW by
schedule, otherwise
block is selected as the
action
on page 189).
LAN WAN rules
LAN DMZ rules
LAN WAN rules
DMZ WAN rules
DMZ WAN rules
LAN DMZ rules