NETGEAR ProSAFE SRX5308 Reference Manual page 108

Delegation table to enable the DHCPv6 server to assign these prefixes to its IPv6 LAN
clients.

To add an IPv6 prefix:
1. On the LAN Setup screen for IPv6, under the List of Prefixes for Prefix Delegation table,
click Add. The Add Prefix Delegation Prefixes screen displays:
Figure 60.
2. Enter the following settings:
• IPv6 Prefix. Enter a prefix, for example, 2001:db8::.
• IPv6 Prefix Length. Enter the IPv6 prefix length, for example, 64.
3. Click Apply to save your changes and add the new prefix to the List of Prefixes for Prefix
Delegation table on the LAN Setup screen for IPv6.

To edit a prefix:
1. On the LAN Setup screen for IPv6 (see
the Action column for the prefix that you want to modify. The Edit Prefix Delegation
Prefixes screen displays.
2. Modify the settings as described in
3. Click Apply to save your settings.

To delete one or more prefixes:
1. On the LAN Setup screen for IPv6 (see
the left of each prefix that you want to delete, or click the Select All table button to
select all prefixes.
2. Click the Delete table button.
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Step 2
LAN Configuration
Figure 58 on page 104), click the Edit button in
of the previous procedure.
Figure 58 on page 104), select the check box to
108