Table 11: Port Operational States and Actions (EWS) (Continued)
Operational State
Invalid Attachment
Link Reset
Not Installed
12
Install an SFP optical transceiver in the port receptacle. Refer to
Optical
Exit MAP.
13
At the HAFM appliance, does a blinking red and yellow diamond (failed FRU
indicator) appear adjacent to a Fibre Channel port graphic at the Hardware View?
NO
14
Did a Fibre Channel port fail a loopback test?
NO
15
Does a yellow triangle (attention indicator) appear adjacent to a port graphic at the
Hardware View?
YES
Edge Switch 2/24 Service Manual
Transceiver" on page 195.
This procedure is concurrent and can be performed while the switch is
powered on and operational.
Verify location of the failed port.
Perform an external loopback test for the port as part of FRU removal and
replacement. Refer to
YES
A port failure is indicated. Go to
YES
Go to
step
18.
NO
Go to
step
17.
Go to
step
22.
Go to
step
33.
Go to
step
12.
"Perform Loopback
step
Action
"RRP: SFP
Tests" on page 160.
6.
Diagnostics
97