HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 43

34
Beaconing is enabled for the FRU.
1. Consult the customer and next level of support to determine the reason FRU
2. Disable FRU beaconing.
Was FRU beaconing enabled because FRU failure or degradation was suspected?
YES
Go to
35
Does a yellow triangle (attention indicator) overlay a port graphic?
YES
36
Inspect the port state and LED status for all ports with an attention indicator.
1. Double-click a port to open the Port Properties dialog box
Edge Switch 2/24 Service Manual
Go to step 35.
beaconing is enabled.
a. At the Hardware View, right-click the FRU graphic. A pop-up menu
appears.
b. Click the Enable Beaconing option. The check mark disappears from the
box adjacent to the option, and FRU beaconing is disabled.
NO
The switch appears operational. Exit MAP.
step 20 and perform fault isolation again (through the HAFM appliance).
NO
Go to step 37.
Diagnostics
(Figure 11).
45